Production Engineer (Electrical/ Mechanical/ Metal Part)

Responsible for one of the following functions

BOM/Drawing Part

● Manage the BOM/Drawing of all sewing machine models.

● Updating, checking and confirming to release the BOM, Drawing and Operation Manual.

● Prepare and update QC sheets, manuals, check sheets for manufacturing section

● Manage and maintain the accuracy of the BOM contents, drawings and operating instructions - no affect production.

● Evaluates the component quality and supplier performance.

● Timely update the changes in design, BOM, drawings and inform all teams.

● Responsible for managing the BOM/Drawing management procedure of the technical team.

● Support for production in terms of job request.

● Periodically report to the supervisor and technical leader.

● Perform other tasks as assigned.

Production Electrical Part

• Own & drive pre-production and production phase to ensure product meets requirements.

• Support prototyping phase to ensure product meets requirements.

• Study assembly methods and calculate cutting time for products.

• Investigate root cause, take countermeasures and improvement for reduction defects.

• Resolve problems using solutions that involve new techniques and technologies.

• Searching, selection and execution to invest machines, equipment, tooling, sub materials for manufacturing, Prepare necessary items for implemental new products.

• Improve process for ensuring capacity and reducing cost.

• Prepare and update QC sheets, manuals, check sheets for manufacturing section

• Evaluates and resolves production issues, technical feasibility and design optimization.

• Evaluates the electrical component quality and supplier performance.

• Coordinate with the quality control team to fix and improve product quality.

• Support for production in terms of job requests.

• Observe safety and housekeeping at workstation.

• Technical detail report making and periodically report to the supervisor.

• Perform other tasks as assigned.

Electrical Part

• Electrical/Electronic new part development control.

• DFM checking and confirming with R&D team.

• New product regulatory requirements control experience is an advantage.

• Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).

• Responsible for quality, yield, cost, and cycle time improvement.

• Evaluates the component quality and supplier performance.

• Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.

• Evaluates and resolves production issues, technical feasibility, and design optimization.

• Coordinate with the leader of all teams to lead the product quality improvement.

• Support for production in terms of job requests.

• Own & drive pre-production and production phase to ensure product meets requirements.

• Improve process for ensuring capacity and reducing cost.

• Technical detail report making and periodically report to the PE leader.

Perform other tasks as assigned

Metal Part

● Metal new part development control.

● DFM checking and confirming with R&D team.

● New product regulatory requirements control experience is an advantage.

● Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).

● Responsible for quality, yield, cost, and cycle time improvement.

● Evaluates the component quality and supplier performance.

● Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.

● Evaluates and resolves production issues, technical feasibility, and design optimization.

● Coordinate with the leader of all teams to lead the product quality improvement.

● Support for production in terms of job requests.

● Own & drive pre-production and production phase to ensure product meets requirements.

● Improve process for ensuring capacity and reducing cost.

● Technical detail report making and periodically report to the PE leader.

Perform other tasks as assigned

QUALIFICATIONS/REQUIREMENTS:

Experience:

● At least 3-5 years working experiences as production engineer or BOM/Drawing management engineer.

● Have experience in sewing machine.

● System processing experience - specifically, SAP.

Skills/personal qualifications:

● Reading & analyze technical drawing interpretation, 3D modelling, engineering documents.

● Proactive, aggressive, high level of autonomy, well-organized and hardworking.

● Good communication and presentation skills.

● High level of autonomy, experience in working in fast moving.

● Good at MS Office & Internet Application and SAP system.

● Knowledge of regulatory and safety requirements related to technical designing.

● Team work to solve problem happened during production and advice on corrective actions.

● English communication skills are required.

● More experience of sewing machines is advantageous

Education and Certifications:

● University degree in Industrial Engineering or related discipline.