Mô tả công việc
Department: Production Engineering
Reports To: PE Manager
We need to recruit the following positions:
1. BOM/Drawing Management Engineer
2. Production Electrical Engineer
3. Electrical Part Engineer
4. Packaging Engineer
5. Metal Part Engineer
Essential functions and key responsibilities are:
1.BOM/Drawing Management Engineer
● Manage the BOM/Drawing of all sewing machine models.
● Updating, checking and confirming to release the BOM, Drawing and Operation Manual.
● Prepare and update QC sheets, manuals, check sheets for manufacturing section
● Manage and maintain the accuracy of the BOM contents, drawings and operating instructions - no affect production.
● Evaluates the component quality and supplier performance.
● Timely update the changes in design, BOM, drawings and inform all teams.
● Responsible for managing the BOM/Drawing management procedure of the technical team.
● Support for production in terms of job request.
● Periodically report to the supervisor and technical leader.
● Perform other tasks as assigned.
2.Production Electrical Engineer
• Own & drive pre-production and production phase to ensure product meets requirements.
• Support prototyping phase to ensure product meets requirements.
• Study assembly methods and calculate cutting time for products.
• Investigate root cause, take countermeasures and improvement for reduction defects.
• Resolve problems using solutions that involve new techniques and technologies.
• Searching, selection and execution to invest machines, equipment, tooling, sub materials for manufacturing, Prepare necessary items for implemental new products.
• Improve process for ensuring capacity and reducing cost.
• Prepare and update QC sheets, manuals, check sheets for manufacturing section
• Evaluates and resolves production issues, technical feasibility and design optimization.
• Evaluates the electrical component quality and supplier performance.
• Coordinate with the quality control team to fix and improve product quality.
• Support for production in terms of job requests.
• Observe safety and housekeeping at workstation.
• Technical detail report making and periodically report to the supervisor.
• Perform other tasks as assigned.
• 3.Electrical Part Engineer
• Electrical/Electronic new part development control.
• DFM checking and confirming with R&D team.
• New product regulatory requirements control experience is an advantage.
• Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
• Responsible for quality, yield, cost, and cycle time improvement.
• Evaluates the component quality and supplier performance.
• Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
• Evaluates and resolves production issues, technical feasibility, and design optimization.
• Coordinate with the leader of all teams to lead the product quality improvement.
• Support for production in terms of job requests.
• Own & drive pre-production and production phase to ensure product meets requirements.
• Improve process for ensuring capacity and reducing cost.
• Technical detail report making and periodically report to the PE leader.
Perform other tasks as assigned
4.Packaging Engineer
● Carton/Styrofoam new part development control.
● DFM checking and confirming with R&D team.
● New product regulatory requirements control experience is an advantage.
● Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
● Responsible for quality, yield, cost, and cycle time improvement.
● Evaluates the component quality and supplier performance.
● Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
● Evaluates and resolves production issues, technical feasibility, and design optimization.
● Coordinate with the leader of all teams to lead the product quality improvement.
● Support for production in terms of job requests.
● Own & drive pre-production and production phase to ensure product meets requirements.
● Improve process for ensuring capacity and reducing cost.
● Technical detail report making and periodically report to the PE leader.
● Perform other tasks as assigned.
5. Metal Part Engineer
● Metal new part development control.
● DFM checking and confirming with R&D team.
● New product regulatory requirements control experience is an advantage.
● Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
● Responsible for quality, yield, cost, and cycle time improvement.
● Evaluates the component quality and supplier performance.
● Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
● Evaluates and resolves production issues, technical feasibility, and design optimization.
● Coordinate with the leader of all teams to lead the product quality improvement.
● Support for production in terms of job requests.
● Own & drive pre-production and production phase to ensure product meets requirements.
● Improve process for ensuring capacity and reducing cost.
● Technical detail report making and periodically report to the PE leader.
Perform other tasks as assigned
Yêu cầu công việc
QUALIFICATIONS/REQUIREMENTS:
Experience:
● At least 3-5 years working experiences as production engineer or BOM/Drawing management engineer.
● Have experience in sewing machine.
● System processing experience - specifically, SAP.
Skills/personal qualifications:
● Reading & analyze technical drawing interpretation, 3D modelling, engineering documents.
● Proactive, aggressive, high level of autonomy, well-organized and hardworking.
● Good communication and presentation skills.
● High level of autonomy, experience in working in fast moving.
● Good at MS Office & Internet Application and SAP system.
● Knowledge of regulatory and safety requirements related to technical designing.
● Team work to solve problem happened during production and advice on corrective actions.
● English communication skills are required.
● More experience of sewing machines is advantageous
Education and Certifications:
● University degree in Industrial Engineering or related discipline.
Các phúc lợi dành cho bạn
Thưởng
Chăm sóc sức khoẻ
Đào tạo
Thông tin việc làm
29/10/2024
Nhân viên
Kỹ Thuật > Cơ Khí Tự Động Hoá
Production, Industrial Engineering, Design Drawing, Packaging, 3D Model
Sản xuất
Bất kỳ
3
Không hiển thị
Địa điểm làm việc
Hải Dương, Việt Nam
KCN Tân Trường, xã Tân Trường, huyện Cẩm Giàng, Tỉnh Hải Dương
(Xem bản đồ)Nhận diện một số hình thức lừa đảo
Lừa đảo thu phí
Đưa ra lời mời làm việc dễ dàng bất thường, đãi ngộ cao, kèm theo yêu cầu nộp các loại phí.
Xem chi tiết